Removal and installation of the intercooler. BMW the 7th E38 series (from 1994 to 2002 release)
 
BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.3. Power supply system of diesel engines
6.3.1. Principles of functioning of control systems of diesel engines
6.3.2. Removal and installation of the case of the air cleaner
6.3.3. Removal and installation of a turbocompressor
6.3.4. Removal and installation of the intercooler
6.3.5. Replacement of the sensor of pressure of pressurization
6.3.6. Removal and installation of the sensor of pressure in the fuel distributive highway
6.3.7. Removal and installation of the regulator of pressure and distributor of fuel
6.3.8. Replacement of the valve of a cut-off of supply of fuel
6.3.9. Removal and installation of fuel lines and fuel distributive highway
6.3.10. Removal and installation of the valve of preliminary heating
6.3.11. Removal and TNVD installation
6.3.12. Removal and installation of nozzles
6.3.13. Replacement of the fuel tank, his jellied mouth, and also fuel pump and sensors of a reserve of fuel
6.4. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



6-3-4-snyatie-i-ustanovka-interkulera.html

6.3.4. Removal and installation of the intercooler

If the established hoses of nadduvochny air are not fat-free also damp, it can lead to failure of the supercharger. Do not allow damage of plates of the intercooler.


 PERFORMANCE ORDER

  1. Remove an engine cooling system fan casing (see the Head of the Cooling system of the engine, heating, ventilation and conditioning).
  2. Remove the forward panel of protection of auxiliary units.

Models with the M57 engine

 PERFORMANCE ORDER

  1. Unclench collars (1), remove a hose (2), disconnect a hose (3) and put it aside.
  1. Wring out clamps (1 and 2) on both parties and extend the intercooler at the same time a little.
  1. Take out the intercooler (1) in the direction specified by shooters.
  1. If necessary replace an arm. For this purpose wring out the screw-driver a bracket (1) up and remove an arm (2).
  1. Installation is made upside-down.

Models with the M67 engine

 PERFORMANCE ORDER

  1. Weaken collars (1 and 3) and disconnect pressure head sleeves (2 and 4).
  1. Perform the operations specified in paragraphs 2 - 5.


"previous page
6.3.3. Removal and installation of a turbocompressor
following page"
6.3.5. Replacement of the sensor of pressure of pressurization