Removal and installation of a fuel jellied mouth. BMW the 7th E38 series (from 1994 to 2002 release)
 
BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.2.1. Principles of functioning of a control system of the petrol engine
6.2.2. Removal and installation of the case of the air cleaner
6.2.3. Removal and installation of a branch pipe between a flowmeter of air and the case of a butterfly valve
6.2.4. Removal and installation of the case of a throttle, replacement of its laying
6.2.5. Removal and installation of the IAC valve
6.2.6. Removal and installation of the fuel distributive highway and injectors
6.2.7. Replacement of the regulator of pressure of fuel
6.2.8. Removal and installation of the fuel pump
6.2.9. Removal and installation of sensors of a reserve of fuel
6.2.10. Removal and installation of the fuel tank
6.2.11. Removal and installation of a fuel jellied mouth
6.3. Power supply system of diesel engines
6.4. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



6-2-11-snyatie-i-ustanovka-toplivnojj-zalivnojj-gorloviny.html

6.2.11. Removal and installation of a fuel jellied mouth

 PERFORMANCE ORDER

  1. Empty the fuel tank.
  2. Remove the right back wheel and a loker of a back right wheel arch.
  1. Separate the EVAP pipeline.
  1. Remove a hose of connection of a mouth with the fuel tank (see an illustration).
  1. Give the lower fixture of a mouth.
  1. Give the top fixture of a mouth.
  1. Take out assembly of a mouth from a rubber cuff on a wheel arch.
  2. Installation is made upside-down. After installation of a mouth measure electric resistance between a grounding tag (at a jellied mouth of the fuel tank) and a wheel nave – it has to make about 0.6 Ohms.


"previous page
6.2.10. Removal and installation of the fuel tank
following page"
6.3. Power supply system of diesel engines