Removal and installation of a heater. BMW the 7th E38 series (from 1994 to 2002 release)
 
BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
5.1. Engine cooling system
5.2. Systems of heating, ventilation and air conditioning
5.2.1. General information
5.2.2. Removal and installation of a heater
5.2.3. Removal and installation of a radiator of a heater
5.2.4. Removal and installation of fans and resistor assemblies
5.2.5. Removal and installation of the additional water pump and water valve
5.2.6. Removal and installation of deflectors of systems of heating, ventilation and To/in
5.2.7. Removal and installation of the K/V compressor
5.2.8. Removal of other components of the K/V system
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



5-2-2-snyatie-i-ustanovka-otopitelya.html

5.2.2. Removal and installation of a heater

 PERFORMANCE ORDER

  1. Remove hoses (1) of the cooling system on a partition of a motive compartment. Carefully blow supplies to remove the remains of cooling liquid from a radiator.
  1. Lower OZh and disconnect both pipelines (2) on a partition of a motive compartment. Turn out bolts (3).
  2. Remove a steering column (see the Head Podvesk and steering).
  3. Remove facing of the dashboard, ware box and stiffening ribs with left and on the right side (see the Head Kuzov).
  4. Remove a heater.
  5. Installation is made upside-down. After installation fill the K/V system and the cooling system. Pump over the cooling system.


"previous page
5.2.1. General information
following page"
5.2.3. Removal and installation of a radiator of a heater