Removal and installation of the pallet of a case. BMW the 7th E38 series (from 1994 to 2002 release)
 
BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
4.1. General information and preparatory operations
4.2. Check of compression pressure
4.3. Check of the engine by means of the vacuum gage
4.4. Petrol M60/1 and M60/2 engines
4.4.1. Removal and installation of a cover of a head of cylinders
4.4.2. Removal and installation of a head of cylinders, adjustment of phases GRM
4.4.3. Removal and installation of the top section of the pallet of a case
4.4.4. Removal and installation of the pallet of a case
4.4.5. Removal and installation of covers of a chain of GRM
4.4.6. Replacement of epiploons of a bent shaft
4.4.7. Removal and installation of a flywheel
4.4.8. Removal and installation of belts of the drive of auxiliary units
4.4.9. Removal and installation of a damper of tortional fluctuations and its nave
4.4.10. Removal and installation of the oil pump
4.4.11. Removal and installation of the inlet pipeline
4.4.12. Removal and installation of final collectors
4.4.13. Removal and installation of the engine
4.5. M62 engine
4.6. Diesel M57 engine
4.7. Diesel M67 engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



4-4-4-snyatie-i-ustanovka-poddona-kartera.html

4.4.4. Removal and installation of the pallet of a case

The description given below is suitable also for M62 engines.


 PERFORMANCE ORDER

  1. Remove protection of a case of the engine.
  2. Turn out a cover of an oil filter and a stopper of a drain opening in the case pallet. Lower motive oil.
  1. Separate the inclusion sensor electrical wiring socket To/L oil level.
  1. Turn out bolts of fastening of the pallet of a case and remove it.
  1. Clear the interfaced surfaces of the remains of sealing materials.
  1. Installation is made upside-down. Use new laying and new bolts. For convenience of installation use pins.


"previous page
4.4.3. Removal and installation of the top section of the pallet of a case
following page"
4.4.5. Removal and installation of covers of a chain of GRM