BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
2.1. Access, protection
2.1.1. Keys, uniform lock and DU panel
2.1.2. Doors and trunk lid
2.1.3. Access to podkapotny space
2.1.4. Access to a jellied mouth of the fuel tank
2.1.5. Top hatch
2.1.6. Windows of doors
2.1.7. Anticreeping system
2.2. Elements of security systems
2.3. Car equipment, arrangement of devices and governing bodies
2.4. Devices of ensuring comfort
2.5. Methods of operation and auxiliary systems
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Schemes of electric equipment



2-1-6-okna-dverejj.html

2.1.6. Windows of doors

The description of management of window regulators by means of the uniform lock is provided in the Section Access, protection.

The mechanism э / drive of window regulators of forward doors has function of prevention of jamming, i.e. at emergence of excessive resistance when closing a window glass will be stopped and a little lowered. Nevertheless, do not interfere with closing of windows since it can lead to a trauma.

On some models shock-proof side glasses and back glass are established – such glasses are not protected from scratches therefore for removal of hoarfrost from their inside it is not necessary to use a scraper. Besides, it is not necessary to use abrasive detergents – use water and household window cleaner.
Э / drive of window regulators works in provisions "1" and "2" of the lock of ignition.
For management the switches located in the panel of the corresponding door or driver's door are used.

It is possible to operate window regulators and after switching off of ignition, one of forward doors will not be open yet – to open a window, press the switch, having overcome resistance point.


 PERFORMANCE ORDER

  1. For opening/closing of a window of a door press on corresponding edges of the corresponding switch to feeling of resistance and hold the switch in this situation until glass reaches required position. If to press the switch, having overcome resistance point, and then to release it, glass will continue to move.
  2. To stop glass press the switch once again.

In the bottom of the control unit of window regulators on a door of the driver the switch of blocking of window regulators of back doors is located – use it, for example, if on a back seat there are children.


"previous page
2.1.5. Top hatch
following page"
2.1.7. Anticreeping system