Replacement of lamps of devices of internal lighting. BMW the 7th E38 series (from 1994 to 2002 release)
 
BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
14.1. General information, diagnostics of malfunctions
14.2. Lighting fixtures
14.2.1. Adjustment of headlights
14.2.2. Removal and installation of headlights and their components
14.2.3. Removal and installation of other devices of external lighting
14.2.4. Removal and installation of devices of internal lighting
14.2.5. Replacement of lamps of devices of external lighting
14.2.6. Replacement of lamps of devices of internal lighting
14.3. Screen wipers and washers
14.4. Other electric equipment
15. Schemes of electric equipment



14-2-6-zamena-lamp-priborov-vnutrennego-osveshheniya.html

14.2.6. Replacement of lamps of devices of internal lighting

Lamps of the main saloon lamp

 PERFORMANCE ORDER

  1. Remove the ceiling lamp in collecting (see the Section Removal and installation of devices of internal lighting).
  2. On models with lamps of individual lighting turn a cartridge of the corresponding lamp counterclockwise and remove it. Take out a lamp.
1 — the Boss of a lamp of the left individual lamp
2 — the Boss of the main saloon lamp
3 — the Boss of a lamp of the right individual lamp
  1. On models without lamps of individual lighting turn out screws (1), remove the ceiling lamp (2) from the lens who is under it and remove lamps.

Lamp of a lamp of illumination of a cosmetic mirror

 PERFORMANCE ORDER

  1. Remove a mirror illumination lamp (see the Section Removal and installation of devices of internal lighting).
  1. Unclench contact arches (1) and remove a lamp (2).

Light-emitting diode of illumination of internal handles of doors

 PERFORMANCE ORDER

  1. Remove finishing of a door (see the Head Kuzov).
  1. Disconnect a light-emitting diode with a cable (1) from a flask (2).
  1. Cut off a cable (1) of a light-emitting diode length (And = 10 cm) from a door electrical wiring plait.
  1. Cut off the end of a wire of a new light-emitting diode 16 cm long.
  2. Connect a plait of an electrical wiring of a door and a cable of a light-emitting diode by means of a butt connector and kembrik.
  3. Record the site of repair on a door electrical wiring plait.


"previous page
14.2.5. Replacement of lamps of devices of external lighting
following page"
14.3. Screen wipers and washers