Removal and installation of seat belts. BMW the 7th E38 series (from 1994 to 2002 release)
 
BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.2. Equipment of salon
13.2.1. Removal and installation of window regulators
13.2.2. Removal and installation of finishing and sound insulation of a forward door
13.2.3. Removal and installation of finishing and sound insulation of a back door
13.2.4. Removal and installation of panels of finishing of racks of a body and ceiling
13.2.5. Removal and installation of finishing of the dashboard
13.2.6. Removal and installation of the shelf behind a back seat and blinds of back glass
13.2.7. Removal and installation of overlays of thresholds of doors
13.2.8. Removal and installation of elements of finishing of the luggage compartment and its cover
13.2.9. Removal and installation of front seats
13.2.10. Removal and installation of a back seat
13.2.11. Removal and installation of seat belts
13.2.12. Removal and installation of a cover of the top hatch
14. Onboard electric equipment
15. Schemes of electric equipment



13-2-11-snyatie-i-ustanovka-remnejj-bezopasnosti.html

13.2.11. Removal and installation of seat belts

Lobbies

 PERFORMANCE ORDER

  1. Remove a front seat (see the Section Removal and installation of front seats).
  2. Remove a guard on a front seat and finishing of the central rack (see the Section Removal and installation of panels of finishing of racks of a body and ceiling).
  1. Separate the socket (1) natyazhitel of a seat belt and fix wires by a collar (2) so that the socket was not intense.
  1. Turn out the screw (1) and remove a natyazhitel of a seat belt. Pay attention to marking of provision of a natyazhitel of a seat belt to a seat.
1 — the Bolt
2 — the Washer
3 — the Returnable mechanism of an average belt
4 — the Lock washer
5 — the Left seat belt
6 — the Washer
  1. Remove a clip (1) and a bracket (2). Turn out the screw (3) and remove the returnable mechanism of a seat belt.

At installation pay attention to marking of position of the returnable mechanism of a seat belt on the central rack. Be convinced of correctness of installation of a cable of the drive in a clip (1).


  1. Give a nut (1) and remove the taking-away ring of the mechanism of adjustment of a seat belt on height. If necessary remove the adjustment mechanism, having unhooked a drive cable.
  1. Installation is made upside-down.

Back

 PERFORMANCE ORDER

  1. Remove a back of back sitting (see the Section Removal and installation of a back seat).
  2. Remove the shelf behind a back seat (see the Section Removal and installation of the shelf behind a back seat and blinds of back glass).
  1. Uncover.
  1. Wring out clamps and shoot a video.
  1. To remove the left and right returnable mechanisms of a seat belt.
  1. Turn out a bolt (1) of fastening of the right/left seat belt to the average returnable mechanism.

Fixture of the right belt to the average returnable mechanism
1 — the Bolt
2 — the Washer
3 — the Lock of a zone belt
4 — the Lock washer
5 — the Right seat belt

Fixture of the right belt to the average returnable mechanism

1 — the Bolt
2 — the Washer
3 — the Returnable mechanism of an average belt
4 — the Lock washer
5 — the Left seat belt
6 — the Washer
  1. Remove locks of the right and left seat belts. For this purpose unbend the cut-out part of a sound-proof covering (2) up and turn out a bolt (1).
  1. Installation is made upside-down.


"previous page
13.2.10. Removal and installation of a back seat
following page"
13.2.12. Removal and installation of a cover of the top hatch