BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.2. Equipment of salon
13.2.1. Removal and installation of window regulators
13.2.2. Removal and installation of finishing and sound insulation of a forward door
13.2.3. Removal and installation of finishing and sound insulation of a back door
13.2.4. Removal and installation of panels of finishing of racks of a body and ceiling
13.2.5. Removal and installation of finishing of the dashboard
13.2.6. Removal and installation of the shelf behind a back seat and blinds of back glass
13.2.7. Removal and installation of overlays of thresholds of doors
13.2.8. Removal and installation of elements of finishing of the luggage compartment and its cover
13.2.9. Removal and installation of front seats
13.2.10. Removal and installation of a back seat
13.2.11. Removal and installation of seat belts
13.2.12. Removal and installation of a cover of the top hatch
14. Onboard electric equipment
15. Schemes of electric equipment



13-2-10-snyatie-i-ustanovka-zadnego-sidenya.html

13.2.10. Removal and installation of a back seat

Seat pillow

 PERFORMANCE ORDER

  1. On models with heating of a back seat and/or э / drive of adjustment of head restraints separate the corresponding sockets of an electrical wiring.
  1. For this purpose wring out clamps, lift back sitting to the maximum situation (A = 150 mm) and separate the socket.
  1. Remove a pillow of back sitting.

Back

 PERFORMANCE ORDER

  1. Remove a head restraint and a pillow of back sitting.
  1. Turn out a bolt of fastening of a seat belt (1), give a nut (2). On models with heating of a back of a back seat separate the socket (3). Unbend a sound-proof covering (4) forward and turn out a bolt (5).
  1. Uncover.
  1. Wring out clamps, disconnect a roller from an overlay of a seat belt and extend a tape of a seat belt.
  1. Remove a back of back sitting by the movement up.
  1. Installation is made upside-down. Hook on loops for ledges and fix a back of back sitting by bolts.


"previous page
13.2.9. Removal and installation of front seats
following page"
13.2.11. Removal and installation of seat belts