BMW 7_aya the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Cardan and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.1.1. Removal and installation of a forward wing
13.1.2. Removal, installation and adjustment of doors
13.1.3. Removal, installation and adjustment of a cowl, replacement of its racks
13.1.4. Removal, installation and adjustment of a cover of the luggage compartment, replacement of its components
13.1.5. Removal and installation of a front bumper and its components
13.1.6. Removal and installation of a rear bumper and its components
13.1.7. Replacement and adjustment of mobile glasses of doors
13.2. Equipment of salon
14. Onboard electric equipment
15. Schemes of electric equipment



13-1-4-snyatie-ustanovka-i-regulirovka-kryshki-bagazhnogo-otdeleniya-zamena-ee-komponentov.html

13.1.4. Removal, installation and adjustment of a cover of the luggage compartment, replacement of its components

Removal and installation of a cover of the luggage compartment

The plait of an electrical wiring of a cover of the luggage compartment has no socket therefore before its removal it is necessary to take an electrical wiring plait from a cover.


 PERFORMANCE ORDER

  1. Lead round loops on a cover of the luggage compartment to avoid its adjustment after installation.
  1. Weaken the screw (1) at the left and on the right, turn out the screw (2) on the right and at the left and uncover the luggage compartment the movement back.
  1. Installation is made upside-down.

Adjustment

Sizes of gaps are specified in Specifications of the Head Kuzov.


 PERFORMANCE ORDER

  1. Adjustment of a cover of the luggage compartment is made similar to adjustment of a cowl, by means of loops, buffers and the lock.

Removal and installation of racks

 PERFORMANCE ORDER

  1. Open a cover of the luggage compartment, remove the fixing washer (1) and a spring bracket (2).
  1. Remove a rack.
  2. Installation is made upside-down.

Removal and installation of a decorative overlay of a cover of the luggage compartment

 PERFORMANCE ORDER

  1. Turn out bolts of fastening of registration plate and lift a cover of the luggage compartment.
  1. Remove lamps (1) of illumination of registration plate and separate the socket. Release clips (2).
  1. Remove consolidation.

At installation of selection on consolidation and on a cover of the luggage compartment have to coincide.


  1. Lift a decorative slip for a bottom (1) via the cylinder (2) locks and release from clips the movement down and back.
  1. Installation is made upside-down. Replace the damaged clamps, caps and (if necessary) neoprene film (1).

Removal and installation of the cylinder of the lock of the luggage compartment

 PERFORMANCE ORDER

  1. Remove a trunk lid covering (see the Section Removal and installation of elements of finishing of the luggage compartment and its cover).
  1. Remove a collar of a plait of an electrical wiring (1) and separate sockets (2 and 3).
  1. To disconnect draft (1) of the cylinder of the lock, give nuts and remove the lock cylinder.

At installation make sure of correctness of position of draft.


  1. Unclench clips, remove microswitches (1 and 2).
  1. Lift the holder and remove the microswitch (3).

When replacing if colors of wires and kembrik of microswitches differ, previously apply on them the corresponding tags.

  1. Installation is made upside-down. The cylinder of the lock has to be installed on one axis with an aperture in a body. Check serviceability of functioning with an open trunk lid.

Removal and installation of the top part of the lock of the luggage compartment

 PERFORMANCE ORDER

  1. Remove a trunk lid covering (see the Section Removal and installation of elements of finishing of the luggage compartment and its cover).
  2. To remove an electrical wiring plait collar (1 on an illustration) and separate the average socket (between sockets 2 and 3).
  1. To disconnect draft (1) of the drive of the cylinder of the lock, turn out bolts and remove the top part of the lock of a cover of the luggage compartment.
  1. When replacing disconnect draft (1) of the drive, cut a collar (2) plaits of an electrical wiring and remove the microswitch (3).
  1. Installation is made upside-down. Check serviceability of functioning with an open trunk lid.


"previous page
13.1.3. Removal, installation and adjustment of a cowl, replacement of its racks
following page"
13.1.5. Removal and installation of a front bumper and its components